GUTEX Thermofloor®
Versatile impact insulation board for all floor applications
- 20
- 30
- 1200x600 mm
λD (W/mK) 0,040
Applications
- Wet screed (cement, anhydrite, etc.)
- Mastic asphalt
- Dry screed
-
Advantages
Technical Data
GUTEX Thermofloor®
- Superb air and impact insulation
- Compressibility with live loads ≤ 5 kN/m2
- Broad application diversity
- Consistently uniform board dimensions make installation quicker and easier
- Optimum thermal insulation
- Superior thermal storage capacity provides outstanding insulation against heat in summer and cold in winter
- Regulates humidity and is vapour diffusion permeable
- Manufactured from wood, a sustainable natural resource
- Recyclable
- Biologically safe (natureplus© certified
- Made in Germany
Certificates & Test marks
InstallationAccessoriesPlease follow the following instructions carefully:
Installation:
- Store and install this product dry.
- Suitable for single or double course (with offset joints) with max. total build-up thickness of 60 mm (see table below).
- If higher insulation built-up heights are required, use GUTEX Thermosafe-wd (max. 100 mm).
- Substrate must be dry, even and technically sound.
- If required, install a moisture barrier.
- Ceilings with exposed wood joists require trickle protection paper.
- Edge stripping must be as high as the total built-up height of the floor.
- To cut the boards, use GUTEX saw blades for jigsaws or circular saws and a vacuum fitting.
- Vacuum off the dust in accordance with applicable workplace safety regulations or practices.
- Install the boards so the joints are tight. Use the oddment of the last board of a row to start the next row (refer to layout plan). Edge stripping must be as high as the total built-up height of the floor.
- If installing wet screed, lay a moisture barrier over the installed boards.
Insulating material overlay
Layout pattern
GUTEX Thermofloor®
